Today 09:00 AM - 05:30 PM (Currently Closed) |
Tel:
01983 828000
Fax:
01983 828100
|
Gurit is a leading, global supplier of composite materials,
engineering services, tooling equipment and select parts and systems. With more
than 30 years experience in the industry Gurit has the expertise to provide
customers with outstanding products and services.
As a well-respected developer and innovator in the
composites industry, Gurit is continually investing in state-of-the-art
equipment and techniques in order to meet the ever-developing demands of the
industry.
We offer a range of products and materials including:
performance prepregs, structural prepregs, fire, smoke, toxicity materials,
structural cores, adhesives, laminating resins, tooling resins, coatings,
ancillaries and more.
We also provide various tooling and automotive services as
well as engineered structures.
Please read on and/or visit our website to find out more about our fantastic products and services. Alternatively, please contact our friendly team at Gurit to discuss your project requirements with a member of the team. We look forward to hearing from you.
Here at Gurit, we have been supplying prepregs to the wind
energy and marine industries for a number of years. This has paved the way for
our next generation of prepregs that have been specifically designed to make
the manufacture of turbine blades even faster, easier and cheaper.
Prepregs are essentially reinforcement fibres or fabrics that have been impregnated by a pre-catalysed resin system. The resin systems in the materials react very slowly in room temperature allowing working times from days to months. Prepreg resins can be fully cured by heating them to the prescribed cure temperature.
We also offer a wide selection of structural composite
product solutions. These can be categorised into three main product groups:
Please visit our website to download and view datasheets.
We are global leaders in the development and manufacture of
advanced composite materials, process equipment and tools for the global wind
energy, tooling, marine and engineered structures market.
We offer a fantastic range of fire retardant products that
have been expertly designed and manufactured to deliver high performance
results. Our fire retardant range features a selection of formats from curing
liquid systems through to elevated temperature curing SPRINT™ products.
Items in the range are widely used for applications such as cladding of buildings, interior and exterior train parts, commercial/ military craft and fire protection on passenger ferries.
Gurit offers a wide range of core materials to suit any
customer specification or manufacturing process. Our structural core materials
are supplied in sheet form and can feature a range of cut patterns of finishes
to suit specific customer requirements.
The range includes:
We are specialists in the formulation of advanced epoxy
resins. Our excellent Spabond epoxy adhesive range is widely used for wind
turbine, industrial and marine applications due to its outstanding performance
in composite and non-composite bonding applications.
Items in the Spabond range are available in a range of
formats to suit different customer requirements. Cartridge applicators enable
users to provide perfectly mixed adhesive to the joint while various mixing
machines can be used to mix and dispense on larger volume applications.
Our adhesive films are designed for secondary bonding, core-bonding and co-curing in conjunction with our prepregs and SPRINT™.
We are pleased to have pioneered the use of epoxy ‘wet’
lamination techniques for the production of large structures. Now in our fourth
generation of production, we offer a fantastic range of top quality products.
Our Ampreg wet laminating range features standard products
as well as systems with higher strengths and operating temperatures.
The PRIME™ infusion system is widely used for the single
operation moulding of components such as narrow carbon yacht masts and wind
turbine blades.
PRIME™ epoxy infusion systems are designed for ‘under the
bag’ infusion processes such as SCRIMP™, RIFT (Resin Infusion under Flexible
Tooling) and VARTM (Vacuum Assisted Resin Transfer Moulding).
We are pleased to supply the Ampreg wet laminating range.
This range features standard, commonly used products as well as systems with
higher strengths and operating temperatures. Various hardeners and modifiers
also meet a range of working times, viscosities and thixotropy.
We also offer our excellent RENUVO™ UV Curing Composite Technology. RENUVO™ provides an innovative approach to the manufacture and repair of modern wind turbine blades via state-of-the-art lamp equipment. Full cure can be achieved in just a few minutes.
We also offer a wide selection of composite tooling products
suitable for use in the marine market. All products are carefully designed as
part of a complete tooling solution and feature properties optimised for the
intended application.
Our tooling product range features a tooling paste designed
for pattern manufacture and a range of ambient curing mould materials that are
suitable for use in operating temperatures of 130°C / 265°F.
Our range of coating epoxies are as popular today as they
were back in the 1980’s when we set out providing products for the wooden boat
builder/ restorer. They are hard wearing and available in solvent or
solvent-free formulations to suit a range of applications including osmosis
treatment, priming, top coating and varnishing.
We supply CR 3400 – an in-mould epoxy surfacing system for
epoxy laminates that is designed to be used as the base for the application of
paint. CR 3400 has a longer overcoating compared to other gelcoats – up to one
day with standard hardener at 20°C.
We are extremely proud to boast one of the largest, highly
experienced composite engineering teams in the world.
We offer:
We provide services to customers in a range of industries
including: Marine, Wind Energy, Architectural Structures, Transportation, Ocean
Energy and Industrial.
Our top quality composite materials are widely used for a
range of industrial applications due to their high performance characteristics.
We have completed projects in a number of areas such as mining, oil and gas,
amphibious craft and construction.
We offer:
Gurit (Tooling) produces more than 40 wind turbine blade
mould sets per year from its China based facility. More than 600 highly skilled
engineers work together to design and manufacture high quality tooling using
state-of-the-art technology.
We offer:
Our top quality tooling services complement our other core offerings
of structural design and composite materials.
As one of the largest global mould manufacturers we are
continually looking to develop our services and are looking to enter new
markets such as marine and transportation applications.
We have been supplying first class carbon-fibre based Class
A panels to leading OEM’s since 2007. Our ability to develop innovative
technology stems from our complex understanding of composite materials,
structural design and materials processing. Our experience enables us to
formulate, design, prototype and manufacture fully assembled, primed and coloured
exterior body panels.
We work closely with customers in order to achieve results that meet specific customer requirements and expectations. Please give us a call to discuss your project requirements.
Info
Registration Number: | 01368806 |
VAT Number: | GB228 4376 51 |
Registered at Companies House: | 16 May, 1978 (45 years and 11 months ago) |
No of Employees: | 1001-5000 |
Annual Turnover: | n/a |
Parent Company: | Gurit Holding AG |
Importers: | |
Exporters: | |
Company Type: |
|
Opening Times
Monday | 09:00 AM - 05:30 PM |
Tuesday | 09:00 AM - 05:30 PM |
Wednesday | 09:00 AM - 05:30 PM |
Thursday | 09:00 AM - 05:30 PM |
Friday | 09:00 AM - 05:30 PM |
Saturday | Closed |
Sunday | Closed |
To view more detailed financial information for this company click here.