Kecol Pumping Systems is the UK's leading designer, manufacturer and supplier of air powered piston pumps for the transfer of an incredibly wide range of viscous materials. Much more than just a website and a warehouse, Kecol is able to send its vastly experienced engineers to your plant in order to assess your pumping requirements and to recommend a cost-effective solution. Be it a stainless steel, high pressure, drum-emptying or viscous pump, you can trust Kecol to provide a practical pumping solution. All of our products are manufactured to ISO 9001 standards at our facility in Shropshire, so when you make an investment with Kecol you can be assured of a high quality pump that will withstand the daily rigours of industrial usage. And alongside quality products comes a quality service - with over 20 years of experience in the pumping sector, we’re always on hand to provide the solutions to your pumping problems. Our engineers are well-qualified to offer advice and guidance on a range of pump-related issues.
Our clients include major manufacturers within the food, pharmaceuticals, cosmetics and chemical industries. They rely on our pumps for the fast, efficient and often hygienic transfer of an exceptionally wide range of materials, from foodstuffs such as honey and mayonnaise, to cosmetics such as toothpaste and mascara. You can find more examples of the materials that our pumps typically handle by visiting the Kecol Pumping Systems website, www.kecol.co.uk.
Kecol designs and manufactures a range of Air Powered Piston Pumps to suit standard and non-standard drums, containers and IBCs. These are available with a maximum delivery output of 45 Litres per minute at a pressure rating of 175 Bar. Our drum pumps are in use around the world to transfer pharmaceuticals, cosmetics, foodstuffs and general industrial materials in a clean, quiet and efficient manner.
Typical materials include petroleum jelly, shampoos, hair creams, sun lotions, toothpastes, honey, jams, tomato purees, mayonnaise, paints, resins, adhesives, and much more. Kecol drum pumps may be manufactured as hygienic models using 316 stainless steel contact parts.
To find out more, please visit our website at www.kecol.co.uk.
Kecol has considerable experience in supply, repair and service of all types of diaphragm pumps. We offer an excellent range of products from leading manufacturers such as Sandpiper, Blagdon and Wilden, are able to provide a comprehensive service facility either from the Kecol headquarters or at your premises.
If you would like to find out more about the types of diaphragm pumps that we supply and service, please head to the Kecol website or get in touch with our sales team on 01746 764311.
Kecol produces a range of Air Powered Stubby Piston Pumps to suit standard and non-standard drums, containers and IBCs. These are available in hygienic (stainless steel) or standard (painted) format, and may have a maximum delivery output of 130 Litres per minute at a pressure rating of 175 Bar.
Our stubby piston pumps are used throughout the world for the clean, quiet and efficient transfer of a range of pharmaceutical, cosmetic, food industry, chemical and general industrial materials. Polished hygienic models have a ‘Quick Strip’ system for cleaning and maintenance. Vertical, horizontal or wall mounted configurations are available.
To find out more, please visit our website at www.kecol.co.uk.
Powerlift is a single post pneumatic unit typically used to raise and lower Kecol drum pumps, and is available in a painted or stainless steel configuration. These castor-mounted units have been designed to transfer products in a clean, quiet and efficient manner, without the need to manually handle both the pump and product drum. Powerlift may be modified to suit vessels and containers of various shapes and sizes.
Find out more about Powerlift and its capabilities by following the link to the Kecol website.
Powerprime is a single post pneumatic unit that gives a positive prime to the pump, allowing products of up to 150,000 cPs to be pumped cold. An integrated wiper ring on the follower plate clears the inner walls of the drum to remove the maximum amount of material. Powerprime pump primers are available in painted or stainless steel configuration, and may be supplied as mobile or static units. They may also be modified to suit various types of container or vessel.
Find out more by visiting www.kecol.co.uk.
Maxiprime is a twin cylinder pressure priming system that can be used together with a Kecol stubby piston pump to maintain a positive prime when pumping pastes and high viscosity materials that do not flow. As the product level falls, an attached follower plate clears the sides of the drum to move the maximum amount of material.
Maxiprime is available in a painted or stainless steel construction, and may also be supplied as a mobile or static unit.
This is a floor mounted, single post pneumatic unit that is used to raise and lower Kecol pumps. The articulated arm allows the pump to transfer materials from pallet mounted drums without removing them from the pallet, thereby avoiding a number manual complications Articulated Powerlift units are available in a painted or stainless steel construction, and may be modified to suit various vessels or containers.
You can find out more about Powerlift by visiting www.kecol.co.uk or by giving the Kecol team a call on 01746 764311.
Megaprime is a twin cylinder pressure priming system that can be used together with a Kecol stubby piston pump in order to maintain a positive prime when pumping materials of the very highest viscosity (up to 10,000 poise viscosity 'COLD'). An attached follower plate wipes the sides of the vessel clean as the product level falls, ensuring optimum material transfer.
Megaprime units are built to order, and are therefore suitable for drums, IBCs and mixing vessels of various sizes and shapes. They may be supplied in a painted construction for industrial and chemical applications or in a stainless steel construction for hygienic applications. The Megaprime priming system is used throughout the world to transfer pastes in a clean, quiet and efficient manner.
Kecol Pumping Systems offers an outstanding range of accessories that can be used in conjunction with its pumps and priming systems, including adjustable stroke air motors which enable the adjustment of pump output per cycle. These can be used together with the Kecol Batch Counter to pre-determine the number of cycles to be completed.
To find out more, simply follow the link to the Kecol website.
Info
| Registration Number: | 06405042 |
| VAT Number: | n/a |
| Registered at Companies House: | 22 October, 2007 (16 years and 6 months ago) |
| No of Employees: | n/a |
| Annual Turnover: | n/a |
| Importers: | |
| Exporters: | |
| Company Type: |
|
Opening Times
| Monday | 09:00 AM - 05:30 PM |
| Tuesday | 09:00 AM - 05:30 PM |
| Wednesday | 09:00 AM - 05:30 PM |
| Thursday | 09:00 AM - 05:30 PM |
| Friday | 09:00 AM - 05:30 PM |
| Saturday | Closed |
| Sunday | Closed |
| ISO 9001:2015 - Quality management systems – Requirements |
To view more detailed financial information for this company click here.
