Avon Impact Management is a specialist supplier of impact protection fenders and extrusions manufactured from high quality EPDM rubber. Because this material is resistant to oil, salt and ozone attack, our products are used in a variety of applications and environments, including the marine industry. For over 100 years, Avon has been working with large organisations and governments all around the world to develop products that provide the protective solutions that they need. Over the course of the last century, we have acquired an in depth knowledge of material formulation, design expertise and environmental responsibility. Our Extruded Solutions range offers protection for vehicles and buildings from damage, reducing maintenance and repair costs. Our wall fenders, corner fenders, wheel chocks, aircraft chocks, expansion joints, speed ramps, vehicle stops and garage stops are in use all over the world to prevent costly damage and downtime. Avon also specialises in Marine Fenders that are designed to protect vessels from the damage caused by impact. These can be tailor-made to your vessel specifications and will offer optimum protection for many years, without the need for constant maintenance. Marine Fenders can be manufactured in a wide range of shapes and sizes and are suitable for all docks, jetties, piers, boats, ferries and larger vessels. Our range of marine fenders includes D fenders, B fenders, hollow fenders, solid fenders, cylindrical fenders and rectangular fenders.
All of our products are designed and manufactured at our very own production facility in the UK, so you can be assured that quality standards remain consistent and at the very highest level. So if you need superior protection in your facilities and on your vessels, give Avon Impact Management a call today. Whether it’s a small quantity or a large volume order, we’re always happy to receive any enquiry!
These have been designed to fit accurately into a pre-determined gap and are used predominantly for traffic calming measures. Expansion joints require no fixing or bonding solution to hold them in place - they expand within the gap for a secure fit and assume the camber of the road/walkway surface. Made from EPDM materials, they are highly resistant to oil, salt and ozone attack. Co-extruded yellow stripes improve visibility. We have two different types available: 63.5mm (surface depth), ideal for roads, garages, car parks etc; and 19mm, ideal for pedestrian walkways, light vehicles etc.
Our wall fender products offer excellent protection for buildings and vehicles against impact damage, while also shielding customers and staff from accidents and injuries. Quick and easy to install, our wall fenders reduce maintenance and repair costs, while also helping businesses maintain good health and safety standards. Wall fenders are made from weather resistant EPDM rubber which also resists oil, salt and ozone attacks. The flexible material means the fender easily assumes to contour of surface it is fitted to. Other products in the wall fender range include the D fender and the P fender. The D fender is a medium impact rubber extrusion typically used in parking garages and ‘back of house’ applications. D fenders are supplied in 1, 2, 3, 4 and 5 metre continuous lengths and are pre-drilled for fast installation. The P fender is a high quality wall guard which acts as a protective skirting, shielding buildings and vehicles from damage. They come in three standard lengths and feature two co-extruded yellow stripes for enhanced visibility.
We supply high quality corner fenders which are designed to protect buildings from damage, shield staff and customers from injury, and reduce vehicle repair costs. Every product that we supply comes complete with parts for quick and easy installation. Our heavy duty corner fender consists of an anti-ozone rubber profile with a central rib for enhanced strength, impact resistance, and durability. Extremely easy to install, these rubber extrusions are guaranteed to prolong the life of a pillar or 90° exterior corner. The medium duty corner fender is a lighter version of the heavy duty corner fender, offering columns and corners protection from impact and scuffing. Both types feature co-extruded yellow stripes to enhance the visibility of the corner or column.
Rubber speed ramps are a cost-effective solution for calming traffic on roads and in parking areas. Our speed ramps come supplied in 1, 2, 3, 4, and 5 metre continuous lengths and feature two co-extruded yellow stripes which enhance visibility of the ramp. Two height options of 60mm or 70mm are available to choose from. They come pre-drilled for quick and easy installation, while the EPDM material assumes the camber of the surface it is fitted to.
We're extremely proud that our marine fenders are in use all around the world, providing robust, reliable and durable protection for all sorts of boats, ferries, docks, jetties and piers. We have developed our own rubber compounds that are formulated for weather and abrasion resistance. Though we have a huge range of standard size marine fenders, we’ll design bespoke fenders that meet your own requirements. Whatever the compound, profile design and installation requirement, we’ll find the perfect solution for your application. Included in our marine fender range are canal boat fenders, d fenders, solid rectangular fenders, hollow rectangular fenders, hollow cylindrical fenders, winged fenders, keyhole fenders, b fenders, fast ferry fenders, gunwale funders, wedge fenders and more. To find out more, follow the link to our website where you’ll also find a downloadable catalogue.
Avon’s canal boat fenders draw upon a proven design which utilises an anti-ozone rubber for increased durability and greater impact resistance. They provide ideal protection for all types of narrowboats/canal boats. Our canal boat fenders measure 500mm in length, 48mm in diameter, and are fitted with a 3m high visibility rope.
Our garage stops make vehicle positioning within an enclosed environment significantly easier. They feature co-extruded yellow stripes that enhance visibility and are supplied pre-drilled for easy installation. AIM garage stops are made from EPDM materials which are resistant to oil, salt and ozone attack, making them far more durable than similar products on the market. A weather resistant finish means they are suitable almost all climatic conditions.
Our D-Fender wall fender features a robust design and has been manufactured to protect against both impacts and scuffing. As well as being a premium product made from high quality materials, the D-Fender also features two co-extruded stripes which increase viability. This product is also extremely versatile and can be used in many different environments thanks to its weather resistance. Customers can visit the website for further details such as dimensions and can even download the relevant data sheet.
Our P Section range of products have also been designed to provide protection against impacts and scuffing. These products are offered in a size of 85mm x 300mm and feature a 1,2,3 continuous length. As with many of our products, we like to make it easier for our customers so the P Section is pre-drilled to accommodate fitting. Customers can have peace of mind that these products will work in a wide range of climates and feature a weather resistant design. For any more information, don't hesitate to visit the website.
Parking can prove very difficult for many drivers, especially when space is limited. It is for this reason that so many parking aid products have been designed, one of which is our vehicle stop product. Our vehicle stops feature an impact resistant design and thanks to their distinctive yellow stripe, are extremely visible for the benefit of drivers. These products are also available in two different sizes to accommodate different types of parking spaces. For any more information, please visit the website.
We have a wide range of rubber chocks which have been designed to act as stops for different vehicles, including commercial aircraft, caravans and boat trailers. The chocks have been developed with usability in mind as they are light weight and manoeuvrable thanks to the rope supplied. They are also incredibly hardy and can resist salt, oil and ozone due to their manufacture from EPDM materials. As with many of our products, the chocks are highly visible thanks to the signature yellow stripe.
Here at Avon Impact Management, we are pleased to offer top quality extruded solutions. All products are manufactured from high quality EPDM rubber and many are co-extruded with embossed yellow stripes for enhanced visibility in use. We offer various solutions for reducing impact damage to both walls and vehicles. Our product range includes expansion joints, wall fenders, sprung fenders, corner fenders, aircraft chocks, speed ramps, wheel chocks and garage stops. Please head over to our website to find out more about our extruded solutions, or alternatively, please contact us directly at AIM with your requirements or for more information.
Avon Impact Management is also pleased to supply flexible and versatile Push On Fenders to protect corners and edges from low impact damage. Small and large options are available to suit different customer requirements and all fenders feature co-extruded yellow stripes for enhanced visibility. Our push on fenders are robust and weather resistant making them suitable for application in a range of climatic conditions. They have been manufactured in the UK for more than 50 years and continue to be hugely popular on the market. Please visit our website to view images and to download our product datasheet.
Info
| Registration Number: | n/a |
| VAT Number: | n/a |
| Founded: | 1 January, 1890 (134 years and 3 months ago) |
| No of Employees: | n/a |
| Annual Turnover: | n/a |
| Parent Company: | AVON PROTECTION SYSTEMS UK LIMITED |
| Importers: | |
| Exporters: | |
| Company Type: |
|
Opening Times
| Monday | 09:00 AM - 05:30 PM |
| Tuesday | 09:00 AM - 05:30 PM |
| Wednesday | 09:00 AM - 05:30 PM |
| Thursday | 09:00 AM - 05:30 PM |
| Friday | 09:00 AM - 05:30 PM |
| Saturday | Closed |
| Sunday | Closed |
Follow Avon Impact Management on:
| ISO 14001:2015 - Environmental management systems – Requirements with guidance for use |
