Midtherm Flue Systems Ltd

Midtherm Flue Systems Limited 

"Flue and Chimney Systems for all applications"

    Independent flue system manufacturer manufacture and supply prefabricated flue & chimney systems, natural draught ventilation, natural light systems and associated components for commercial, industrial and domestic use. 

Single Wall Flue

• SW 430&304 - Single Wall Flue systems suitable for use on gas & oil fired equipment.
• Vitrelux - Flue pipe manufactured from zero carbon steel, coated internally & externally. 
• SW Galv - Single Wall ductwork manufactured in aluzinc coated mild steel, suitable for ventilation & extraction. 
• CPS - Single Wall produced from 316 stainless steel 0.5mm thick suitable for use on a wide range of heating process and ventilation applications.
• SW316 - Stainless steel ridged liner available in 22g and 1mm. 

Twin Wall Flue

• Gas Vent - Twin wall flue system suitable for use on domestic gas fired appliances which have a draught diverter.
• LTZ - Twin wall 304 stainless steel inner, 10mm of insulation and zalutite outer for use on gas fired boilers with flue gas temperatures up to 250°C continuous firing.
• LT(LD/GV) - Twin Wall flue system, Aluminium inner liner, 25mm air gap and embossed aluminium (stucco) outer liner. Suitable for use on gas & oil fired equipment with flue gas temperatures not exceeding 260°C. 
• PS - Single & Twin Wall versions of this system have a fully welded inner liner, capable of operating at pressures up to 1700mm wg. 
• LT (LT/SS), MT, HT, HT Plus - Twin Wall Insulated flue systems for gas & oil fired applications up to 380°C, MT up to 540°C and HT up to 740°C. 

Flexible Flue

• Midflex Euroflex - Gas & Oil Flex Packs, Euroflex 904L, Midflex 316L

Sundry Items 

• Aquarius - Silicone and EPDM Flexible Roof Flashings 
• Lead Slates - Flexible Lead Roof Flashings 
• Rotorvent - Aerodynamic Spinning Cowls 

Terminals

• Combivent - Designed to allow the vertical discharge of flue gases through a roof mounted unit.
• Windvent - A natural ventilation system operating on aerodynamic principles. 

Natural Lighting

• DuctLight - An efficient means of illuminating any area by means of conducting natural daylight through a Super reflective tube. 

Fan Assisted

• Fluevent Fans - Inline Flue Boost Fans 
• Fluevent Units and Fan Dilution Systems - A low noise, low cost, aesthetically pleasing alternative to conventional flue dilution systems. 

Heating

• Radiant Heaters - Gas fired radiant tube heating, suitable for industrial & commercial applications.