CMP Products Ltd

Brand & Trade Names

• A2 200 Hex HD Series Cable Gland CMP A2 200 type indoor and outdoor non-metallic Hex Head cable gland for use with all types of Unarmoured cables, providing an environmental seal on the cable outer sheath. The A2 200 Hex Head cable glands are available in various colours and are supplied complete with a locknut. Standard thread forms are metric to EN 60423. Standard versions are produced in Low Smoke and Fume (LSF) polymeric materials with UL 94 V2 rating. Alternative versions are available in Red coloured Flame Retardant, Low Smoke and Fume (LSF) and Halogen Free polymeric material with UL 94 V0 rating.
• A2 Industrial Cable Gland CMP A2 type brass indoor and outdoor cable gland for use with all types of Unarmoured cable, providing mechanical cable retention and an environmental seal on the cable outer sheath. The CMP A2 range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• A2 SOLO LSF Industrial Cable Gland Kit CMP A2 SOLO type brass indoor and outdoor cable gland kit for use with all types of Unarmoured cable, providing a seal on the Cable Outer Sheath. The cable gland provides both a sealing function and also mechanical cable retention. The CMP A2 SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design. The cable gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen Free Shrouds and Seals.
• A2DG Dome Top Cable Gland CMP A2DG type indoor and outdoor non-metallic Dome Cap cable gland for use with all types of Unarmoured cables, providing an environmental seal on the cable outer sheath. A2DG cable glands are available in various colours and are supplied complete with locknut. Standard thread forms are metric to EN 60423. Standard versions are produced in Low Smoke and Fume (LSF) polymeric materials with UL 94 V2 rating. Alternative versions are available in Red coloured Flame Retardant, Low Smoke and Fume (LSF) and Halogen Free polymeric material with UL 94 V0 rating.
• A2F Cable Gland, Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type A2F Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with un-armoured and braided cable providing a combined flameproof seal and environmental seal on the cable outer sheath. This product provides full compatibility with restricted breathing equipment that rely upon flammable gases being excluded from the main enclosure. The CMP A2F Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection, installation and maintenance is observed, e.g. IEC 60079-14.
• A2F-FC Type Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland For Flexible Metallic Conduit Connection CMP Type A2F-FC Tri-Star Triple Certified Flameproof (Type "d"), Increased Safety (Type "e") and Restricted Breathing (Type "nR") indoor and outdoor conduit connection cable connector for use in Zones 1, 2, 21 and 22, Hazardous Areas with un-armoured cable housed in flexible metallic conduit systems. The cable gland provides full compatibility with restricted breathing equipment. The CMP A2F-FC Tri-Star Cable Connector is suitable for use with all forms of equipment protection permitted in Zones 1, 2, 21 & 22, providing always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14
• A2FRC Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland for Conduit Connection CMP Type A2FRC Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor conduit connection cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with un-armoured cable housed in rigid or flexible conduit systems. The cable gland provides a combined flameproof seal and environmental seal on the cable outer sheath. This product provides full compatibility with restricted breathing equipment. The CMP A2FRC Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14
• A2RC Industrial Cable Gland With Conduit Connection Facility CMP A2RC type brass indoor and outdoor conduit connection cable gland for use with all types of Unarmoured cables housed in rigid conduit systems. The cable gland is equipped with a rotating male or female connection which is available in a variety of thread forms for ease of conduit installation, including NPT and Metric. Customers are requested to kindly specify the male and female thread form and sizes required when ordering. The CMP A2RC range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• B2KX Ordinary Locations Cable Connector B2KX Ordinary Locations Cable ConnectorCMP B2KX Cable Connector suitable for use with Bronze Wire Armor cables in ordinary locations but may also be used in Class I Div 2 areas when installed in compliance with the NEC requirements. The cable connector provides mechanical retention and electrical continuity via the armor termination and is available in NPT (standard) or Metric thread forms. Standard material is Brass grade CuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component.
• B323 & B347 Insulated Industrial Cable Gland CMP B323/B347 ZEN type brass cable gland for use with all types of Single Wire Armour (SWA) cable providing an environmental seal on the outer sheath, mechanical retention and electrical continuity via armour termination. The CMP ZEN range of industrial cable glands is designed and tested to BS6121:2005, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The CMP type B323 ZEN cable gland is supplied complete with a unique CMP Cast Integral Earth Lug. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required. The cable gland concept effectively provides insulation between the cable armour and the equipment and helps to eliminate undesirable circulating currents. To maximise protection in such circumstances it is normal to connect the armour wires to earth at the supply end of the cable and insulate them from the equipment at the field device end.
• B324 & B348 Insulated Industrial Cable Gland CMP B324/B348 ZEN type brass cable gland for use with all types of Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. The CMP ZEN range of industrial cable glands is designed and tested to BS6121:Part 1:1989, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The CMP type B324 ZEN cable gland is complete with a unique Cast Integral Earth Lug concept. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against Short circuit earth fault currents is required. This cable gland concept effectively provides insulation between the cable armour and the equipment and helps to eliminate undesirable circulating currents. To maximise protection in such circumstances it is normal to connect the armour wires to earth at the supply end of the cable and insulate them from the equipment at the field device end.
• B327 & B350 Insulated Industrial Cable Gland CMP B327/B350 ZEN type brass cable gland for use with all types of Screened and Single Wire Armour (SWA) cable providing an environmental seal on the outer sheath, mechanical retention and electrical continuity via armour wire termination. Additional facility for termination of the cable's overall screen inside is also provided within the cable gland design. The CMP ZEN range of industrial cable glands is designed and tested to BS6121:2005, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The CMP type B327 ZEN cable gland is supplied complete with a unique CMP Cast Integral Earth Lug. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required. The cable gland concept effectively provides insulation between the cable armour and the equipment and helps to eliminate undesirable circulating currents. To maximise protection in such circumstances it is normal to connect the armour wires to earth at the supply end of the cable and insulate them from the equipment at the field device end.
• B367 & B368 Insulated Industrial Cable Gland CMP B367/B368 ZEN type cable gland for use with all types of Wire Braid, Pliable Wire, Strip Armour or Steel Tape Armour (e.g. STA/DSTA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. The CMP ZEN range of industrial cable glands is designed and tested to BS6121:2005, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The CMP type B367 Zen cable gland is complete with a unique CMP Cast Integral Earth Lug. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required. The cable gland concept effectively provides insulation between the cable armour and the equipment and helps to eliminate undesirable circulating currents. To maximise protection in such circumstances it is normal to connect the armour wires to earth at the supply end of the cable and insulate them from the equipment at the field device end.
• BW Industrial Cable Gland CMP BW type brass indoor cable gland for use with all types of Single Wire Armour (SWA) cable providing mechanical cable retention and electrical continuity via armour wire termination. The CMP BW range of industrial cable glands is designed and tested to BS6121:2005, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• BW SOLO LSF Industrial Cable Gland Kit CMP BW SOLO type brass indoor cable gland kit for use with all types of Single Wire Armour (SWA) cable, providing mechanical cable retention, and electrical continuity via armour wire termination. The CMP BW SOLO range of industrial cable glands is designed and tested to BS6121:2005, and is produced from Brass grace CuZn39Pb3 (CW614N) to EN12168. The cable gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen Free Shrouds.
• BWL CIEL Heavy Duty Industrial Cable Gland CMP BWL CIEL type brass indoor cable gland for use with all types of Single Wire Armour (SWA) cable providing mechanical retention and electrical continuity via armour wire termination. The CMP BWL SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The BWL CIEL cable gland is complete with a CMP unique Cast Integral Earth Lug concept. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required.
• BWL Heavy Duty Industrial Cable Gland CMP BWL type brass indoor cable gland for use with all types of Single Wire Armour (SWA) cable providing mechanical cable retention and electrical continuity via armour wire termination. The heavy duty BWL design offers the benefit of a longer body to protect the armour wires from impact. The CMP BWL range of industrial cable glands is designed and tested to BS6121:2005, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168
• C2K Increased Safety Ex e Cable Gland CMP Type C2K Increased Safety (Type 'e') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing an environmental seal on the cable outer sheath. The cable gland being suitable for use with amoured cables provides mechanical cable retention and electrical continuity via armour wire termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP C2K Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• C2KGP Industrial Cable Gland CMP C2KGP type brass indoor and outdoor cable gland for use with all types of Single Wire Armour (SWA), Wire Braid Armour, Strip Armour, Pliable Wire Armour & Steel Tape Armour (STA) cable, providing environmental seal on the cable outer sheath and additional deluge seal meeting the test requirements of DTS01:91. ? The cable gland also provides mechanical cable retention and electrical continuity via armour termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access The CMP C2KGP range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262:1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• C2KX Ordinary, Wet & Hazardous Location Cable Connector CMP C2KX Cable Connector suitable for use with Armored & Jacketed cables incorporating Wire Braid Armor in Ordinary, Wet & Hazardous Locations. The cable connector provides mechanical retention and electrical continuity via the armor termination and is available in NPT (standard) or Metric thread forms. Standard material is Brass grade CuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component. This product provides Nema 4X and IP68 ingress protection and is UL listed for use in Class I Zone 1 AEx e II applications and can be used in Class I Division 2 areas when installed in compliance with the NEC requirements.
• CMP V-TEC EX, EX L & EX M Cable Gland (A2Pe) Code of protection EEx e II The CMP V-TEC Type EX, EX L & M Range (A2Pe) of Increased Safety (Type "e") Non-Metallic Cable Glands for Unarmoured and Screened Flexible Cables, is endorses by an EC design type approval certificate in accordance with the requirements of EN50014:1997 & En50019:1994 and the ATEX Directive 94/9/EC, concerning safety of Electrical Equipment, Products and Protection Systems for use in potentially explosive atmospheres (Hazardous Areas). These Cables Gland products provide an environmental seal on the cable outer sheath and have been introduced as a cost effective solution for all indoor and outdoor cable installations in Zone 1 and Zone 3 Hazardous Areas, where Ex e or EEx e Code of Protection has been permitted. This cable gland is also suitable for use in conjunction with Ex de or EEx de equipment and apparatus which has an increased safety terminal chamber. EC design type approval certificate number: PTB 99 ATEX 3112X and ATEX 3113X.
• CW CIEL Heavy Duty Industrial Cable Gland CMP CW CIEL type brass cable gland for use with all types of Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. The CMP CW SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The CW CIEL cable gland is complete with a CMP unique Cast Integral Earth Lug concept. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required.
• CW Industrial Cable Gland CW type brass indoor and outdoor cable gland for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention and electrical continuity via armour wire termination. An armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP CW range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• CW SOLO LSF Industrial Cable Gland Kit CMP CW SOLO type brass indoor and outdoor cable gland kit for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention, and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP CW SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262:1999, and is produced from Brass grade CUZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design. The cable gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen Free Shrouds and Seals.
• CWe Increased Safety Ex e Cable Gland CMP Type CWe Increased Safety (Type 'e') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath. The cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP CWe Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• CX Industrial Cable Gland CMP CX type brass indoor and outdoor cable gland for use with all types of Wire Braid Armour, Strip Armour, Pliable Wire Armour & Steel Tape Armour (STA) cable, providing environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP CX range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• CXe Increased Safety Ex e Cable Gland CMP Type CXe Increased Safety (Type 'e') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Braided, Pliable Wire Armour (PWA), Strip Armour and Steel Tape Armour (STA) cable providing an environmental seal on the cable outer sheath. The cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP CXe Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• CXT Industrial Cable Gland CMP CXT type brass indoor and outdoor cable gland for use with all types of screened flexible wire braid (e.g. CY/SY), or wire braid armour cable. The cable gland provides an environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention and electrical continuity via internal pig-tail termination of the flexible wire braid. The CMP CXT range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• D3CDS Ordinary & Hazardous Location Cable Connector CMP D3CDS Type Cable Connector for use with all types of Wire Braid Armored Marine cables in Ordinary & Hazardous Locations, providing a seal on the cable inner bedding. This product utilizes a unique Compensating Displacement Seal (CDS) system. The cable connector gland provides mechanical cable retention and electrical continuity via armor wire termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner Compensating Displacement Seal (CDS) system and the armor termination affords maximum control over the pressure applied to the cable inner bedding. The D3CDS cable connector is available in NPT (standard) or Metric thread forms and the standard material is Brass grade CuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component.
• E1FU Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type E1FU Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable. This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner Displacement Seal and the Armour Termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A reversible armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath. The CMP E1FU Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14
• E1FW Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type E1FW Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable. This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath. The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14
• E1FX Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type E1FX Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Braided, Pliable Wire Armour (PWA), Strip Armour and Steel Tape Armour (STA) cable. This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath. The CMP E1FX Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• E1U Universal Industrial Cable Gland CMP E1U type brass indoor and outdoor cable gland for use with all types of armoured cables providing an environmental seal on the cable inner bedding and on the cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via the armour termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP E1U range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• E1W CIEL Industrial Cable Gland CMP E1W CIEL type brass cable gland for use with all types of Single Wire Armour (SWA) cable providing an environmental seal on the cable Inner bedding and outer cable sheath, mechanical retention and electrical continuity via armour wire termination. The CMP E1W CIEL range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The E1W CIEL cable gland is complete with a CMP unique Cast Integral Earth Lug concept. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required.
• E1W Industrial Cable Gland CMP E1W type brass indoor and outdoor cable gland for use with Single Wire Armour (SWA) cable providing an environmental seal on the cable inner sheath and the cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP E1W range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• E1W SOLO LSF Industrial Cable Gland Kit CMP E1W SOLO type brass indoor and outdoor cable gland kit for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable Inner Bedding and Outer Sheaths. The cable gland also provides mechanical cable retention, and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP E1W SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design. The cable gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen Free Shrouds and Seals.
• E1X Industrial Cable Gland CMP E1X type brass indoor and outdoor cable gland for use with all types of Wire Braid Armour, Strip Armour, Pliable Wire Armour & Steel Tape Armour cable providing an environmental seal on the cable inner bedding and cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via armour termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP E1X range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• E2FU Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type E2FU Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of Lead Covered or Lead Sheathed and armoured cable. This cable gland provides a Flameproof seal on the cable inner lead covering and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination, and also earth bonding of the inner Lead Covering or Lead Sheath. Separate tightening actions for the inner Displacement Seal and the Armour Termination afford maximum control over the pressure applied to the cable inner lead covering, and also allows the effectiveness of the gas tight seal to be tested. A detachable universal armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath. The CMP E2FU Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• E2FW Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type E2FW Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with lead covered or lead sheathed and single wire armour (SWA) cable. This cable gland provides a flameproof seal on the cable inner lead covering and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment that relies upon flammable gases being excluded from the main enclosure. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination, and also earth bonding of the inner lead covering or lead sheath. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable inner lead covering, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath. The CMP E2FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• E2FX Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type E2FX Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Lead Covered or Lead Sheathed and Braided, Pliable Wire Armour (PWA), Strip Armour, or Steel Tape Armour (STA) cable. This cable gland provides a Flameproof seal on the cable inner lead covering and in addition the gas tight seal has been tested to prove compatibility with restricted breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination, and also earth bonding of the inner lead covering or lead sheath. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to cable inner lead covering, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath. The CMP E2FX Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• E2U Universal Industrial Cable Gland CMP E2U type brass indoor and outdoor cable gland for use with all types of Lead Sheathed and Armoured cables providing an environmental seal on inner lead sheath and the cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via the armour termination and also earth bonding of the inner lead covering or lead sheath. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner lead covering. The CMP E2U range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• E2W CIEL Industrial Cable Gland CMP E2W CIEL type brass cable gland for use with all types of Lead Covered or Lead Sheathed and Single Wire Armour (LC/SWA) cable, providing an earth bond on the inner lead sheath and an environmental seal on the cable outer sheath. Mechanical cable retention, and electrical continuity facility is provided via armour wire termination. The CMP E2W CIEL range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. The E2W CIEL cable gland is complete with a CMP unique Cast Integral Earth Lug concept. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required.
• E2W Industrial Cable Gland CMP E2W type brass indoor and outdoor cable gland for use with all types of Lead Sheathed and Single Wire Armour (SWA) cable providing an environmental seal on the cable inner lead sheath and cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via the armour termination and also earth bonding of the inner lead covering or lead sheath. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner lead covering. The CMP E2W range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• E2X Industrial Cable Gland CMP E2X type brass indoor and outdoor cable gland for use with all types of Lead Sheathed and Wire Braid Armour, Strip Armour, Pliable Wire Armour & Steel Tape Armour cable providing an environmental seal on the cable inner lead sheath and cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via the armour termination and also earth bonding of the inner lead covering or lead sheath. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP E2X range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
• PX2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland CMP Type PX2K Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• PX2K/PB Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland CMP Type PX2K/PB Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of lead sheathed and armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via armour termination, and also earth bonding of the inner Lead Covering or Lead Sheath. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP PX2KPB cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14. The PX2K/PB is supplied in kit form inclusive of two detachable armour cones. Stepped Cone is suitable for SWA cables, Grooved Cone is suitable for all other approved armoured cables.
• PX2KW Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland CMP Type PX2KW Nickel Plated Brass Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc, and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14, AS/NZS 60079.14, or AS/NZS 2381.1, AS/NZS 2381.2, AS 2381.6.
• PX2KX Hazardous Location Cable Connector CMP Type PX2KX Class I Division 1 ABCD Cable Connector for use with Armored & Jacketed cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket. In addition this UL listed cable connector also offers Class I Zone 1, AEx d IIC, Ex d IIC certification. The cable connector provides mechanical cable retention and electrical continuity via armor termination. A detachable armor cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The PX2KX cable connector offers Nema 4X and IP68 ingress protection and is supplied in Brass grade CuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component as standard. The PX2KX is also IEC Ex Triple Certified Ex d, Ex e & Ex nR, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation.
• PXRC Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Conduit Connection Compound Barrier Cable Gland CMP Type PXRC Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of unarmoured housed in rigid or flexible conduit systems. The cable gland provides a compound barrier seal around the cable conductors and is equipped with a rotating female connection for ease of conduit installation. The cable gland provides mechanical cable retention and electrical continuity via metallic conduit termination. The CMP PXRC Conduit Connection Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2 , Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• PXSS2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland CMP Type PXSS2K Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of unarmoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The cable gland provides mechanical cable retention. A combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP PXSS2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14
• PXSS2K Hazardous Location Cable Connector CMP Type PXSS2K Class I Division 2 ABCD Cable Connector for use with Non-Armored Marine & Tray Cable (Type TC) and Extra-Hard Usage Cord, providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket. In addition this UL listed cable connector also offers Class I Zone I, AEx d IIC, Ex d IIC certification. The cable connector provides mechanical cable retention. A combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The PXSS2K cable connector offers Nema 4X and IP68 ingress protection and is supplied in Brass grade CuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component as standard. The PXSS2K is also IEC Ex Triple Certified Ex d, Ex e & Ex nR, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation.
• RHL
• RUSTON HYDRAULIC MOTORS
• SS2K Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR Cable Gland CMP Type SS2K Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with un-armoured cables. This cable gland provides a flameproof seal on the cable inner sheath (or outer sheath of single sheathed cable) and a secondary environmental seal on the cable outer sheath. This cable gland can also be used with braided cables where the sealing is made on the cable overall diameter, when this arrangement is permitted by the prevailing installation code of practice, and the metallic braid is earthed inside the equipment. This product provides full compatibility with restricted breathing equipment and affords extra stability and superior resistance to cable pull out. The CMP SS2K Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• SS2K/PB Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Type SS2K/PB Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with lead sheathed or lead covered unarmoured cables. This cable gland provides a flameproof seal on the cable inner lead sheath and a secondary environmental seal on the cable outer sheath. Suitable for use Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, this cable gland design affords extra stability and superior resistance to cable pull out. This product provides full compatibility with restricted breathing equipment and affords extra stability and superior resistance to cable pull out. The CMP SS2K/PB Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• SS2K/TA Increased Safety Ex e Cable Gland CMP Type SS2K/TA Increased Safety (Type 'e') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with Steel Tape Armour cables. This cable gland provides earth bonding of the metallic tape armour and an environmental seal on the cable outer sheath. Suitable for use Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, this cable gland design affords extra stability and superior resistance to cable pull out. The CMP SS2K/TA Cable Gland is suitable for use with Increased safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
• SS2KGP Industrial Cable Gland CMP SS2KGP type brass indoor and outdoor cable gland for use with all types of Unarmoured cable, providing mechanical cable retention and an environmental seal on the cables inner and outer sheath or a double seal on the cable outer sheath. Suitable for applications where superior cable pull out resistance is required. The CMP SS2KGP range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• SS2KGP/PB Cable Gland CMP SS2KGP/PB type brass indoor and outdoor cable gland for use with all types of Lead Sheathed Unarmoured cable and Steel Tape Armour cables, providing mechanical cable retention and environmental seal on the cable inner lead sheath and cable outer sheath. The cable gland also provides earth bonding of the inner lead covering or lead sheath. The CMP SS2KGP/PB range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
• TC Ordinary, Wet & Hazardous Location Cable Connector CMP Type TC Cable Connector is suitable for use with type (TC) tray cable in ordinary, wet, and hazardous locations including: .Class I Division 2, where permitted by code .Class 1 Zone 1 AEx e and Ex e, where permitted by code .Ingress Protection to Nema 4X and IP66/67/68 The unique use of the seal insert, enables each gland size to terminate the widest range available in a single hub size. The TC cable connector is supplied in Copper free (<0.4%), Aluminium, Stainless Steel, or Electroless Nickel Plated Brass in NPT (standard) and Metric thread forms
• TMC Ordinary, Wet & Hazardous Location Cable Connector CMP Type TMC Cable Connector suitable for use with Corrugated Interlocked & Continuously Welded Metal Clad (Type MC or MC-HL) or TECK armored and armored & jacketed cables in ordinary, wet & hazardous locations including Class II Division 1 & 2 installations.? The cable connector provides mechanical retention and electrical continuity via the armor termination and an environmental seal on the cable outer jacket. In addition this UL listed cable connector also offers Class I Zone 1, AEx e II certification. The re-usable compression spring feature providing both grounding and gripping functions to the cable armor, allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. The TMC cable connector offers Nema 4X and IP66 ingress protection and is supplied in Copper free Aluminum, Stainless Steel, or Electroless Nickel Plated Brass. The TMC is available in NPT (standard) and Metric thread forms, and is ATEX and IEC Ex Certified Ex e II, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation.? Features and Benefits: .CMP renowned displacement seal provides NEMA 4X and IP66 levels of ingress protection. .Additional integral Deluge Proof seal for extra protection in extremely harsh offshore and onshore environments. .Integral equipment interface "O" ring seal as standard** .Independent sealing and armor clamping ?.True 360° grounding? .Superior pull out prevention .Compact slim profile? .Reduced installation time - (no disassembly required) .Widest cable acceptance range? .Re-usable design .Only 13 connector sizes required .Metric option available
• TMC2 Ordinary, Wet & Hazardous Location Cable Connector? CMP Type TMC2 Cable Connector suitable for use with Interlocked & Continuously Welded Metal Clad (Type MC or MC-HL) or TECK armored & jacketed cables in ordinary, wet & hazardous locations including: .Class I Division 2, where permitted by code .Class 1 Zone 1 AEx e and Ex e, where permitted by code .Ingress Protection to Nema 4X and IP68 The 2-part design allows the grounding and over jacket sealing to be actioned in a single simple movement and allows he cable to be easily removed from the equipment, for maintenance and change out etc. The TMC2 cable connector is supplied in Copper free (<0.4%), Aluminium, Stainless Steel, or Electroless Nickel Plated Brass in NPT (standard) and Metric thread forms.
• TMC2X Ordinary, Wet & Hazardous Location Cable Connector CMP Type TMC2X Cable Connector is suitable for use with Interlocked & Corrugated Continuously Welded Metal Clad (Type MC or MC-HL) or TECK armored and armored & jacketed cables in ordinary, wet & hazardous locations including: .Class I Division 1 & Class 1 Division 2 ABCD .Class 1 Zone 1 AE d/Ex d, in accordance with NEC/CEC installations .Class 1 Zone 1 Ex d IIC for ATEX/IEC & IEC Ex installation codes .Ingress Protection to Nema 4X and IP66 The TMC2X utilizes CMP's innovative RAPID Ex Fast Curing Liquid Compound Injection System, which installs in seconds, significantly reducing installation error, with a complete 100% cure time of 1 hour, which significantly reduces installation times. The new 2-part design allows the grounding and over jacket sealing to be actioned in a single simple movement and allows the cable to be easily removed from the equipment, for maintenance and change out etc. The TMC2X cable connector is supplied in Copper Free (<0.4%) Aluminium, Stainless Steel, or Electroless Nickel Plated Brass in NPT (standard) and Metric thread forms.
• TMCX Hazardous Location Cable Connector CMP Type TMCX Cable Connector suitable for use with Corrugated Interlocked & Continuously Welded Metal Clad (Type MC or MC-HL) or TECK armored and armored & jacketed cables in ordinary, wet & hazardous locations including Class I Division 1 & 2 installations.? The cable connector provides a Compound Barrier Seal around the conductors, mechanical retention and electrical continuity via the armor termination and an environmental seal on the cable outer jacket. In addition this UL listed cable connector also offers Class I Zone 1, AEx d IIC certification. The reusable compression spring feature providing both grounding and gripping functions to the cable armor, allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. The TMCX cable connector offers Nema 4X and IP66 ingress protection and is supplied in Copper Free Aluminum, Stainless Steel, or Electroless Nickel Plated Brass. The TMCX is available in NPT (standard) and Metric thread forms, and is ATEX and IEC Ex Certified Ex d IIC & Ex e II, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation.? Features and Benefits: .CMP renowned displacement seal provides NEMA 4X and IP66 levels of ingress protection. .Additional integral Deluge Proof seal for extra protection in extremely harsh offshore and onshore environments. .Independent sealing and armor clamping .True 360° grounding .Superior pull out prevention .Compact slim profile? .Reduced installation time? .Widest cable acceptance range .Supplied complete with epoxy sealing compound? .Disconnectable design .Metric option available
• Triton CDS (T3CDS) Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Triton CDS Type T3CDS Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a Flameproof seal on the cable inner bedding and an environmental seal on the cable outer sheath. All CMP Cable Glands are EMC Tested. This product utilises a unique Compensating Displacement Seal (CDS) system which provides full compatibility with Restricted Breathing equipment that rely upon flammable gases being excluded from the main enclosure. The cable gland provides mechanical cable retention and electrical continuity via armour wire termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner compensating displacement seal (CDS) system and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP Triton CDS Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2 , Zone 21 & Zone 22 provided always that the prevailing code of practice for selection, installation and maintenance is observed, e.g. IEC 60079-14.
• Triton CDS (T3CDS) Ordinary, Wet & Hazardous Location Cable Connector CMP Triton CDS (T3CDS) Type Cable Connector for use all types of Armored & Jacketed Marine cables incorporating Wire Braid or Served (Single) Wire Armor in Ordinary, Wet & Hazardous Locations, providing a seal on the cable inner bedding and an environmental seal on the cable outer jacket. This product utilises a unique Compensating Displacement Seal (CDS) system which provides full compatibility with Restricted Breathing equipment. The cable connector provides mechanical cable retention and electrical continuity via armor wire termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner Compensating Displacement Seal (CDS) system and the armor termination affords maximum control over the pressure applied to the cable inner bedding. The T3CDS cable connector is available in NPT (standard) or Metric thread forms and the standard material is Brass grade CuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component. This product provides Nema 4X and IP68 ingress protection and is UL listed for use in Class I Zone 1 AEx e II applications and can be used in Class I Division 2 areas when installed in compliance with the NEC requirements.
• Triton CDS (T3CDS/PB) Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland CMP Triton CDS Type T3CDS/PB Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of lead sheathed / lead covered and armoured cable providing a flameproof seal on the cable inner lead covering and an environmental seal on the cable outer sheath. This product utilises a unique Compensating Displacement Seal (CDS) system which provides full compatibility with restricted breathing equipment that rely upon flammable gases being excluded from the main enclosure. The cable gland being suitable for use with amoured cables, provides mechanical cable retention and electrical continuity via armour wire termination and earth bonding of the lead sheath. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc, and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner compensating displacement seal (CDS) system and the armour termination affords maximum control over the pressure applied to the cable inner lead covering. The CMP Triton CDS Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection, installation and maintenance is observed, e.g. IEC 60079-14.

Company Certifications

Products & Services