Amazing Products UK Ltd is a Scottish company specialising in the design, manufacture and supply of tungsten carbide and diamond grit saw blades. Our products are used to cut some of the hardest, most abrasive materials known to science. Common applications include concrete, stone, glass and ceramics in the construction industry and semiconductors in the IT industry.
We offer a variety of saw blades in a range of shapes and sizes. Our most popular products include:
All of our products can be purchased online in the Amazing Products UK web store. For more information on our product range, or to discuss your cutting requirements with an industry expert, just give us a call on 01294 271211.
We offer four different types of grit edge circular saw:
Coarse grit configurations are generally used for cutting thick, rough materials, while fine grit is usually preferred for thin materials with fine finishes.
Tungsten carbide is one of the hardest materials known to science. It is capable of cutting even the toughest, hardest materials whilst still leaving a smooth finish. Whether it’s glass, fibreglass, composites, fibre-cement, hardwood, bricks, stone, synthetic marble or any other construction material, our saws will make cutting it quick and easy.
All saws in this category measure 1 3/4” in diameter. Bore diameter is ¼”. Prices can be found on the Amazing Products UK website.
Tungsten grit hacksaw and rod saw blades are available in a variety of sizes, details of which can be found on the Amazing Products UK website. The most common lengths are 5,” 6”, 10” and 12”.
Tungsten grit blades are self sharpening and cut on both strokes. There are no teeth to snag or dull, and they cost significantly less than their diamond equivalents despite them offering similar levels of cutting performance.
While tungsten hacksaw and rod saw blades can be used to cut soft materials such as softwood and mild steel, they are far more effective in cutting tougher materials like ceramic tiles, cement, concrete, hardened tool steel and hardwood.
Tungsten hole saws feature a gulleted edge which is coated with permanently bonded tungsten carbide grit. This edge is designed to increase cutting pressure and allow the cut material to be easily removed. Tungsten carbide hole saws are capable of withstanding the most intense use and will outlast any conventional hole saw. They can be used in corded or cordless drills and are designed to cut both with or without full hammer action.
Being highly resistant to both heat and abrasion, these saws are more than capable of cutting through tough abrasive materials such as brickwork, masonry, slate, marble, ceramics and composites.
For size availability, please head over to our website or call 01294 271211.
Our reciprocating saw blades are Universal Ended, meaning they can fit almost any reciprocating saw, including those from Black & Decker, Sawzall, Skil, Makita, Aeg, Bosch, Elu, Dewalt, Metabo, Hitachi, Festool, Draper, Freud, Silverline, Ryobi and others. They are available in a range of sizes, details of which can be found in our web store.
We also have a range of scrolling reciprocating blades, which are thinner in width and therefore ideal for intricate work on fibreglass, pipework, electrical outlets, etc.
All reciprocating saw blades feature self-sharpening tungsten carbide tips for cutting through hard, abrasive materials like stone, marble, brick and cement.
We also have a range of mandrels / arbors compatible with most regular hole saws which use the standard ½” thread (which is about 99% of all hole saws). The difference between these and standard hole saw arbors is that the pilot drills in the middle are essentially masonry bits, with tungsten carbide tipped points. This makes them ideal for drilling through tough, abrasive materials like marble, concrete and brick. Pilot drills measure 6mm in diameter and can be replaced when required.
Arbors can be supplied with regular or SDS Plus ends and with a choice of HSS pilots, TCT pilots or our special spear point TCT drills.
Products include:
For more information on any of the products listed above, please contact our sales team on 01294 271211.
Info
Registration Number: | n/a |
VAT Number: | n/a |
No of Employees: | n/a |
Annual Turnover: | n/a |
Importers: | |
Exporters: |
Opening Times
Monday | 09:00 AM - 05:30 PM |
Tuesday | 09:00 AM - 05:30 PM |
Wednesday | 09:00 AM - 05:30 PM |
Thursday | 09:00 AM - 05:30 PM |
Friday | 09:00 AM - 05:30 PM |
Saturday | Closed |
Sunday | Closed |