Overview

 Get a Quote

Today 09:00 AM - 05:30 PM (Currently Closed)
Fax: 0161 429 5681
0 questions

Products

Tranter is a global manufacturer of gasketed and welded plate heat exchangers. We have provided heat transfer products and solutions for more than 80 years and remain at the forefront in this area. Tranter offers compact heat transfer solutions to customers worldwide; we are represented in more than 50 countries.

 

Cost-effective heat exchangers

We manufacture the largest range of plates available on the market. Beyond this, we are committed to extending our support to customers through our specialist service centre network; we provide services for all brands and offer spare parts. Tranter is ISO 9001-certified, meeting the highest standards for quality, and we work closely with customers to achieve cost-effective solutions.

 

Plate heat exchangers

The Tranter plate heat exchanger (PHE) provides outstanding efficiency transferring heat from one liquid to another or from steam to liquid. This modular exchanger combines frames, plates and connections to form a variety of configurations. Tranter PHEs are custom-made and are available in more than 30 different sizes with connection sizes ranging from 25mm-500mm.

With the gasket acting as a sealing media between the heat transfer plates, the PHE can be easily opened for cleaning and maintenance purposes. Depending on the applications, heat transfer plates are available in different materials such as SS304, SS316, 254SMO, titanium, Ti-Pd, Hastelloy C-276, nickel, Incoloy and other industrial materials. Gaskets are also available in different materials such as NBR, EPDM, VITON and others that suit individual applications.

 

All-welded plate heat exchangers

Tranter welded heat exchangers (WHEs) are customised to ensure the highest quality and efficiency. They are compact heat exchangers used for extreme temperatures, pressures and specialist designs that exceed gasket limitations. They offer high-performance, small sizes and minimal maintenance. All-welded heat exchangers can handle liquids, gases and two-phase mixtures at very high-pressures, as well as at low and high temperatures.

We offer four main types of all-welded heat exchangers: block, shell and plate, spiral, and prime surface platecoil with connection sizes ranging from 25mm-300mm.

 

Prime surface heat exchangers

Tranter PLATECOIL® prime surface heat exchangers deliver efficient and uniform thermal control in immersion duty; jacketing vessels, reactors or dryer shells, within fluidised beds or configured as gas phase heat recovery banks. In thermal processing of any kind, PLATECOIL exchangers offer customers more effective thermal control than pipe coil, half-pipe, dimple sheet or gridcoil.

 

Spiral heat exchangers

Tranter's spiral heat exchangers can be used in the most demanding conditions endured by applications within the power industry. Because of the all-welded and robust design and the low fouling properties, maintenance costs are kept to a minimum.

The spiral heat exchangers enable heat transfer from a single unit and offer an excellent turndown ratio. The long single-flow passage channels offer almost any required thermal length where challenging process flows can be heated or cooled in a single device, while avoiding any sharp turns of flow that regularly cause blockages.

 

Multi-brand service for heat exchangers

Service is essential for avoiding unscheduled and expensive shutdowns. We ensure plate heat exchangers are properly maintained and that they work according to their specification and capabilities.

Tranter has dedicated service facilities around the world for cleaning, inspection, reconditioning of plates and replacement of gaskets. Alternatively, our teams of OEM trained service engineers can visit your site to service any model of plate heat exchanger. We are committed to extending our support to you through our specialist service centre network and understand your need for minimal downtime. You can trust Tranter - the heat exchanger people - with your plate heat exchanger servicing needs.

 

Research and development for heat transfer plates

Tranter research and development (R&D) for heat transfer plates is located in Stockholm, Sweden, and supported by an R&D group in Wichita Falls, US, as well as another group in Pune, India; both have access to a fully equipped laboratory.

Tranter holds several international and active patents. We also have our own modern die shop, which produces precision dies for both the plate heat exchanger and PLATECOIL product lines.

 

Heat transfer specialists

Tranter achieves market leadership by applying a three-part philosophy:

  • Investing in R&D to maintain a competitive edge
  • Providing customised products with a solution-driven approach
  • Supporting our customers' lifecycle investments through quality parts and services

Backed by more than 80 years of exclusive focus on heat transfer, Tranter has earned its reputation as 'The Heat Transfer People'.

We have ISO-certified, wholly owned factories in the US, Mexico, Sweden, China, Germany, Brazil and India. We support customers from installation through to lifecycle maintenance with a broad network of service centres in the above locations, as well as additional areas such as Canada, UAE, the UK, Italy, Poland, and Korea. Our service centres specialise exclusively in plate heat exchangers, including refurbishment and supply of parts for all known brands in the market.

Details

Info

Registration Number: n/a
VAT Number: n/a
Founded:1 January, 1932 (92 years and 2 months ago)
No of Employees: 501-1000
Annual Turnover: 1-2m
Importers:
Exporters:
Company Type:
  • Manufacturer
  • Service Providers

Opening Times

Monday 09:00 AM - 05:30 PM
Tuesday 09:00 AM - 05:30 PM
Wednesday 09:00 AM - 05:30 PM
Thursday 09:00 AM - 05:30 PM
Friday 09:00 AM - 05:30 PM
Saturday Closed
Sunday Closed

Edit this Company

Questions

If you've any questions about Tranter International AB products or services feel free to ask them here.

Additional Information