Updated: Wednesday the 23^rd of May, 2012 Fibet Rubber Bonding (UK) Ltd

Universal Mounts

Fibet offer a significant range of universal Mounts that are designed to solve any vibration issues on any application. Our range is too extensive to include on these pages, but please refer to our catalogue to see what we offer as a standard isolator.

If you can’t find anything within our catalogue, please still feel free to contact us to discuss your specific project, as we will be more than happy to support you in anyway required.

Bobbin Mounts

A comprehensive range of Bobbin Mounts (Fivistop) for use in applications that require isolation of vibration in compression or shear axis.

These AVM’s can be supplied with male, female or a combinations threads in a wide range of sizes and load capabilities and we hold a substantial amount of stock within the UK for next day delivery.

The Bobbin Mounts are supplied as standard in Natural Rubber. However, we can also offer any of these in other Elastomer compounds for appliances in more arduous environmental conditions.

These products are used in a considerably wide range of applications including Automotive Exhaust Mounts, Machinery of all sizes, Instrumental Devices, Engines, Pumps, Radiators, Measurement Equipment, etc.

Buffers

Fibet offer an extensive range of Buffers / Resilient stops (Fivistop) from stock, which are mainly designed to prevent shock or impact forces or damage to the associated machinery/ equipment.

These are offered with male or female threads in a range of profiles to suit the required level of progressive absorption.

Bell Mounts

Fibet offer a significant range of Bell Mounts (Fivistop) which are available in circular or rectangular designs, different load capabilities and thread sizes to suit a wide range of applications.

These are designed to be low profile, and are offered either with fail-safe (or captive) functionality to provide shock and failure protection, or as a lower cost non fail-safe (non captive) standard Engine Mount design.

The fail-safe (captive) range are used by a wide range of OEM’s and are also compatible with all other OEM Engine Mounts that can be sourced from other suppliers. The Fibet CCF/ CFE/ CFB/ CFAB & CCFQ ranges are all manufactured to a high quality that will perform to the same isolation levels and lifespan required by the OEM companies – and most are available ex-stock for next day delivery.

Our non fail-safe (non captive) ranges are a lower cost solution where there is no requirement for a fail-safe solution. We offer these in a wide range of variants including the standard Bell Mounts CF range – through to the more traditional Flanged Bobbin design that are available with male or female threads – and either with a metal interleaf ( VBLR/ DBLR) to provide increased load capacity and support high impact load charges, or alternatively without this interleaf (VBL/ DBL).

Finally, we have a range of Low Frequency Mounts (SEM range) appropriate for use on light duty applications such as instrumentation panels . All of these products are suitable for use on a wide range of applications including Engines, Gen Sets, Pumps, Compressors, Heating Ventilation and Air Conditioning Units, Marine equipment or any equipment that requires a solution to isolate vibration.

Cone Mounts

The Fibet (Fivistop) range of Cone Mounts are low cost vibration isolators that have a high load capacity within a compact size and provide a stable solution for a wide number of applications. They are designed to provide excellent operation in compression and shear forces, but also provide excellent axial deflection. This range of Conical Mounts ( CN range) are ideally suited for isolating Cabs of Trucks & ground moving equipment, Automotive Engines (Domestic and Commercial), Agricultural Machinery, Earth Moving Machinery, Radiators, Car Engines etc. They can also be supplied with voids within the Rubber (CNA range) that allows the Mount to operate with two different radial loads for certain specific applications that require this design.

The Mounts are supplied with rebound washers that minimise overload situations as well as giving a fail-safe functionality. This product range is held in stock for next day delivery within the UK.

Bushes

The Fibet (Fibel) range of Bushes are extensive, with 1,000’s of size and stiffness variants to suit all applications – the majority of which are available for next day delivery. They are designed to eliminate high frequencies whilst supporting high loads during operation.

They are available in Fully Bonded, Semi-bonded and un-bonded variants, and also with certain options with voids within the Rubber to provide differing isolation in alternate axis. This range of Rubber Bushes enables these products to be used within Automotive, Wind turbine, Earth Moving Equipment & general machinery market sectors.

Levelling Feet

Fibet offer the most comprehensive range of Levelling Feet on the market, covering our own range of feet ( ZAL), as well as being the UK distributor for the Martin range of Levelling Feet.

These ranges cover simple elastomer feet with fixed threads in a variety of sizes and load capacities through to galvanised or stainless steel feet that provide a range of articulations as well as thread size and load capacities. This range of adjustable levelling feet enables these products to be used within the food processing, pharmaceutical, electronic and medical market sectors.

We hold a substantial amount of stock to suit urgent requirements, or can supply any other levelling foot within a short leadtime.

FIBEL

The Fibel range features:

FBNA: a range of bushes designed specifically for the purpose of eliminating high frequencies while supporting high loads during operation. This process is reached via the elastic deformation of the rubber under the effect of the external forces that are being applied to the metal tubes. FBNA bushes feature the rubber bonded to both the inner and outer tubes.

FBNS: a range of bushes designed for the same purpose as the FBNA range however the bushes are manufactured with the rubber assembled to the outer tube and bonded to the inner tube.

FBF: these bushes are designed to extend the service life of suspension components in vehicular applications.

FIVISTOP

FiviLevel