Universal Drilling & Cutting Equipment

Brand & Trade Names

• Airbor NO ELECTRICITY NEEDED Fail Safe permanent air operated magnet Pressurized Coolant System 2" Cutting Capacity Powerful Twin Motors Mechanical Integrity - The motor housing mates directly with the body providing a rigid platform Ideal for use in the oil, gas, chemical and mining industries Controlled by compressed air Spark resistant body Anti-Static Hoses Available to all international standards in two versions Has mining approval
• Broach Cutters A sturdy, technologically-advanced machine with 1050 Watt German Motor with variable speed and overload protection for high-quality, low-cost drilling up to 50mm cutting depth. Designed for broach cutting, the MBE30 also quickly converts to drilling or countersink work and weighs only 13kg. Broach cutting using MAGTRON cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid bit, Magtron cutters remove only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid bit will take 3 minutes, 45 seconds to drill a 32mm hole in 20mm plate. A Magtron cutter can do the same job in 35 seconds! Cuts clean holes faster Cuts more holes before resharpening Cuts on curved surfaces Cuts overlapping holes HSS and HSS-Cobalt milling cutters and tungsten carbide tipped cutters are available in a wide range of lengths and diameters with 5 to 18 cutting edges. Cutters can also be made to special requirements. A full resharpening service is available.
• Magtron Cutter Capacity - 12 -32mm Twist Drill capacity - 13mm Chuck Capacity - 1/2" "No load" Speed - 550 rpm Weight - 10 kg Dimensions - L235 x H325 x W95mm
• Magtron A sturdy, technologically-advanced machine with 1050 Watt German Motor with variable speed and overload protection for high-quality, low-cost drilling up to 50mm cutting depth. Designed for broach cutting, the MBE30 also quickly converts to drilling or countersink work and weighs only 13kg.
• Magtron MB30 MB30 One of the most powerful machines for its size on the market, the MB30 is small, light and portable. A reliable Hitachi motor unit allows drilling of accurate holes up to 32mm in diameter. The arbor can be easily replaced by a chuck with twist drill for holes up to 13mm diameter. Available with automatic coolant system (Option)
• Unibor Electro Magnetic Drilling Systems Unibor E32 Product Description Cutter capacity - 12 to 32mm Twist drill capacity - 13mm Chuck capacity - 1/2" Speed ranges - 550 rpm Weight - 11Kg Dimensions - L235mm - H325mm - W95mm

Products & Services