Updated: Friday the 25^th of May, 2012 AJT Equipment Ltd

• Data systems, 
• Hardness Testers, 

• Physical Test Solutions Testing Machines,
• Environmental chambers and related accessories. 

• Tensile Test Machines, 
• Compression Test Machines, 

• Force Testing Machines, 
• Accuway loadcells, calibrations & test facilities

Accuway TM & Accuway CM with handheld readouts 

• Made from a Lightweight Aerospace Alloy.
• Available Hermetically sealed for use in wet conditions. 
• Complete with carry case.  
• 5 metre cable close coupled to a 4 digit 15mm LCD display. 
• Tare, Peak and Reset facility. 
• The accuracy of the cells are better than 1% of applied load. 

Accuway TMIR & Accuway SMIR - Infrared Operation 

• Manufactured in aluminium alloy with HT steel bushes. 
• Incorporates an 8 gauge bridge together with associated electronics and a 9 volt PP3 non-rechargeable battery. 
• Self contained, has no external cabling. 
• Battery life – typically 50 hours.
• A large [20mm] 3.5 digit built in liquid crystal display.
• A battery switch - provided on the rear of the cell.
• All set up and calibration data is retained when switched off. 

Accuway SMIR - Infrared Operation 

• Control is via a hand held controller. 
• Battery - 1 x PP3 non-rechargeable 
• Mounted on the controller four momentary action push buttons. 
• Range - The infrared controller will operate in bright ambient light conditions, however, it will not operate if the cell is directly facing into the sun. 

• A microprocessor and 18-bit A-D converter
• Very low zero and gain temperature drift. 
• Ratio-metric operation.
• Low level strain gauge input levels 

• Peak with indefinite hold 
• Auto power down
• Low battery indication 
• 5 Volt D.C. bridge excitation 

• Horizontal and vertical test beds

• Safety orientated designs include manual protective, automated protective guards and minimum load on sample features. 

• We have our own in-house design team with CAD facilities. 

• Optional PC integration and Data Acquisition available.