Young Calibration Services specialises in the supply of flow measurement and thermal systems to the industry. The team at Young Calibration Services has more than seventy years combined knowledge and experience within the industry which enables them to provide customers with an unrivalled service. The company comprises three main departments: Thermal testing for specialist testing for air and fluid heat exchangers, Component Testing to provide pressure testing, thermal cycling, vibration testing, shock testing, hot and cold soak, mechanical durability and pulsation testing, and Flowmeter Hire and Consultancy for technical advice, sales and hire of a wide range of equipment. Young Calibration uses the latest technology to provide a high quality service to its customers. All test rig equipment meets ISO 17025 standards and UKAS accreditation is in place for a variety of parameters within the Calibration Laboratory. For further information regarding all of our services please visit our website, or contact one of our helpful advisors at Young Calibration Limited.
|
Our world leading air velocity calibration facilities are widely recognised across the world and provide accurate solutions for all types of anemometer and speed instrument calibration requests. Our universal wind tunnel provides accurate results in high and low speed operating modes. It has a variable diameter nozzle that can meet open jet air velocity calibrations from approximately 0.05 to 100 m/s. The facility can also be adapted to suit closed jet calibrations for air velocities below 2 m/s. Calibration services also include reverse low flow anemometer calibrations and for specific R&D requirements, constant temperature anemometers, 5 hole probes and yaw probes can be installed and calibrated.
|
|
Our gas flow calibration services are widely used in various industries across the world including automotive, medical, environmental and process instrumentation industries. We use the latest technologies to reach high quality, accurate results. We are continually evaluating and developing our gas flow calibration services to ensure that we meet and surpass the changing requirements of gas flow calibration requests in the modern world. Our machinery is calibrated to meet local and national regulatory requirements that are in place across the world. Our laboratories are suitable for temperature and humidity control, calibrations are traceable to national standards and meet meters of up to 8 inches in diameter.
|
|
We provide water calibration solutions that are met using our four calibration rigs: Rig 1 – Flow 5 cc/hr – 0.1 lpm, Rigg - Flow 0.1 – 30 lpm, Rig 3 – Flow 10 – 2000 lpm, and Rig 4 – On site 1 – 1000 lpm. These four calibration rigs are able to undertake calibrations in a range of orientations and environmental conditions to meet your requirements. Our water flow calibration facilities are widely recognised and respected across the world and provide customers with accurate results. Our water flow calibrations are used for water flow meters in horizontal or vertical orientation. Services are provided to customers at competitive prices.
|
|
Our oil flow calibration facilities are provided in our facilities based at Shoreham by Sea. Here, liquid calibration solutions are available for a range of temperatures and viscosities on various hydrocarbon based fluids. Our oil flow calibration services are widely used within the automotive, aviation and hydraulic industries. Specifications include: Flow 0.02 – 80 lpm at 25 - 140°C, Flow 0.02 – 350 lpm at 25 - 45°C, Flow 20 – 600 lpm at ambient temperature, On site 0.05 – 250 lpm and viscosity 0.6 – 200 cST.
|
|
Our medical calibration services are in place to offer solutions for EBME Departments, NHS Trusts and GP Surgeries. Our highly skilled and qualified test engineers use state of the art equipment to provide high quality, accurate calibration services to clients. We also offer onsite, offshore and cruise ship services which are made available via our field service engineers. These engineers carry more than 15 types of medical calibrators to meet many calibration requests that are required in remote locations. Our long term experience within the industry has led us to have trusted partnerships with top manufacturers. These partnerships enable us to continually expand our range of quality products, service, and repair options. All calibration equipment carries traceability back to national standards.
|
|
At Young Calibration Services we offer various on site calibration services. These include: temperature calibration, pressure calibration, air flow calibration, water flow calibration, oil flow meter calibration, humidity calibration, electrical calibration and mass calibration. All of these on site calibration services are carried out with traceability back to national standards. Our technicians and engineers are available during working hours and or out of hours/ weekends if requested. All of our calibration services are carried out to the highest standards and our technicians and engineers are highly qualified and experienced in order to provide excellent calibration solutions.
|
|
We offer various radiator testing facilities to meet requests for cover radiators, cab heaters, low temperature radiators and industrial coolers. Coolant Side Specifications include: Flow 1 to 400 lpm, Pressure < 2 bar dP, Temperature 40 - 95°C and fluids – water of 50/50 antifreeze mix. Cooling Air Side Specifications include: Size 900 x 800 mm, Flow 0 – 4000 l/s, Face Velocity 1 – 15 m/s, pressure 10 – 5000 Pa and Temp 20 – 35 ±1°C. We also offer calorimetric Radiator Testing which offers thermal performance characterisation for industries such as automotive, marine, and for industrial heat exchangers worldwide.
|
|
Our Calorimetric Chargecooler Testing facilities provide thermal performance characterisation for automotive marine and industrial heat exchangers worldwide. As one of Europe’s leading calorimetric testing establishments, Young Calibration’s inter-cooling testing capabilities are widely regarded throughout the world. Charge Air Side Specifications include Flow 0.02 – 0.46 Kg/s, pressure 1.5 – 3.1 barA and temperature 100 – 200 °C. Cooling Air Side Specifications include size 900 x 800mm, Flow 30 – 4000 l/s, face velocity 1 – 15 m/s, pressure 10 – 1800 Pa, and temperature 20 - 35±1°C.
|
|
|
Here at Young Calibration Services we are ISO 17025 accredited and
provide the industry with fully traceable and UKAS accredited calibration and
testing services. We are proud to boast a team of highly talented and qualified
individuals who work together to provide a world class service. We use state of
the art equipment and facilities combined with a methodical and documented
approach for high quality, accurate results.
We are continually evaluating and developing our services to
ensure that we are at the leading edge of the market and are able to continue
achieving the high expectations of our customers. We provide a reliable service
at competitive prices.
|
|
|
Temperature Calibration: these services include the calibration of
chambers, dry blocks, radiometric thermal discs, liquid baths and more from a
temperature range of -40 °C to 1200 °C on different types of probes
and thermocouples. Our instrument range includes thermometers, thermocouples,
PRTs and thermistors, thermal cameras and infrared meters.
Humidity Calibration: this service covers the range of 10 – 98% RH
using our in-house HumGen Calibrator and larger environmental chambers for
multiple or large instruments. We can calibrate various systems including
digital indicators and probes, humidity generators, psychrometers, humidity
recorders, tinytag sensors, thermohygrographs and transmitters.
|
|
We are pleased to provide excellent pressure calibration services.
Our laboratory features various balances and calibrators for gas and hydraulic
pressure calibrations. Our experience in the industry has enabled us to build
great relationships with many leading companies in the industry and we subsequently
use a range of high performance equipment from companies such as Desgranges et
Huot, Ruska, Budenberg, Druck and Mensor. We can calibrate instruments using
air, nitrogen and oil. Examples include: analogue pressure gauges, barometers,
digital pressure gauges, inclined manometers, liquid manometer,
micromanometers, transmitters, altitude sensors and test gauges.
|
|
We also provide calorimetric testing for oil and transmission
coolers (water cooled or air blast models) via our calorimetric wind tunnels
covering flow rates up to 100 litres per minute. Various coolers can be tested
on a controlled specification transmission fluid or high performance engine
motor oil both of which are monitored for accurate results. We can accommodate various
coolers including those used in passenger cars, trucks, buses, motorcycles, performance
race vehicles, military and marine applications. Please visit our website to
find out more about our first class calibration services or contact our
friendly team at Young Calibration Ltd for further information.
|
|
|
http://www.youngcalibration.co.uk
